Regviz

Espressif Systems /ESP32-S3 /RTC_IO /PIN14

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as PIN14

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Espressif Systems/ESP32-S3/RTC_IO/PIN14#0x0

31282724232019161512118743000000000000000000000000000000000000000000 (PAD_DRIVER)PAD_DRIVER0INT_TYPE0 (WAKEUP_ENABLE)WAKEUP_ENABLE

Description

configure RTC GPIO14

Fields

PAD_DRIVER

if set to 0: normal output, if set to 1: open drain
INT_TYPE

if set to 0: GPIO interrupt disable, if set to 1: rising edge trigger, if set to 2: falling edge trigger, if set to 3: any edge trigger, if set to 4: low level trigger, if set to 5: high level trigger
WAKEUP_ENABLE

RTC GPIO wakeup enable bit

Links

()

Register License

Copyright 2024 Espressif Systems (Shanghai) PTE LTD

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data